Yamaha XJ6 2008 Owner'S Manual Download

Page: 34 / 100

INSTRUMENT AND CONTROL FUNCTIONS

4-18

EAU14452

Storage compartment

The storage compartment is located
under the seat. (See page 4-16.)

WARNING

EWA10961

●

Do not exceed the load limit of 3
kg (7 lb) for the storage com-
partment.

●

Do not exceed the maximum
load of 195 kg (430 lb) for the ve-
hicle.

When storing the Owner’s Manual or
other documents in the storage com-
partment, be sure to wrap them in a
plastic bag so that they will not get wet.

When washing the vehicle, be careful
not to let any water enter the storage
compartment.

EAU46830

Handlebar position

The handlebars can be adjusted to one
of two positions to suit the rider’s pref-
erence. Have a Yamaha dealer adjust
the position of the handlebars.

1. Storage compartment

1. Handlebar

U20S20E0.book Page 18 Wednesday, October 15, 2008 2:05 PM

ProCarManuals.com

Summary of Contents for XJ6 2008





































































































Search results

Summary of Contents for XJ6 2008

Reviews:

Related manuals for XJ6 2008

Brands by name

Popular brands

Yamaha XJ6 2008, Owner'S Manual

Search results

Summary of Contents for XJ6 2008

Reviews:

Related manuals for XJ6 2008

Brands by name

Popular brands