Yamaha XG250, Owner'S Manual

Page: 35 / 80

PERIODIC MAINTENANCE AND MINOR REPAIR
6-3
2
3
4
5
6
7
8
9
10 * Tires
●
Check tread depth and for damage.
●
Replace if necessary.
●
Check air pressure.
●
Correct if necessary.
√ √ √ √ √
11 * Wheel bearings
●
Check bearing for looseness or damage.
√ √ √ √
12 * Swingarm
●
Check operation and for excessive play.
√ √ √ √
●
Lubricate with molybdenum disulfide grease. Every 50000 km
13 Drive chain
●
Check chain slack, alignment and condition.
●
Adjust and lubricate chain with a special O-ring chain
lubricant thoroughly.
Every 500 km and after washing the motorcycle or
riding in the rain
14 * Steering bearings
●
Check bearing play and steering for roughness.
√ √ √ √ √
●
Lubricate with lithium-soap-based grease. Every 50000 km
15 * Chassis fasteners
●
Make sure that all nuts, bolts and screws are properly
tightened.
√ √ √ √ √
16 Sidestand
●
Check operation.
●
Lubricate.
√ √ √ √ √
17 * Sidestand switch
●
Check operation.
√ √ √ √ √ √
18 * Front fork
●
Check operation and for oil leakage.
√ √ √ √
19 *
Shock absorber assem-
bly
●
Check operation and shock absorber for oil leakage.
√ √ √ √
20 *
Rear suspension relay
arm and connecting arm
pivoting points
●
Check operation.
√ √ √ √
●
Lubricate with molybdenum disulfide grease.
√ √
21 * Carburetor
●
Check starter (choke) operation.
●
Adjust engine idling speed.
√ √ √ √ √ √
22 Engine oil
●
Change.
●
Check oil level and vehicle for oil leakage.
√ √ √ √ √ √
23 Engine oil filter element
●
Replace.
√ √ √
NO. ITEM CHECK OR MAINTENANCE JOB
ODOMETER READING (
×
1000 km)
ANNUAL
CHECK
1 10 20 30 40