CYLINDER HEAD
ENG
%m
EAS00231
INSTALLING THE CYLINDER HEAD
1. Install:
•
gasket
New
•
dowel pins
2. Install:
•
cylinder head
3. Tighten:
•
cylinder head nuts
X |
10 Nm (1.0 m
*
kg, 7.2 ft
*
lb)
•
cylinder head bolts
X |
10 Nm (1.0 m
*
kg, 7.2 ft
*
lb)
NOTE:
•
Lubricate the cylinder head nuts with en-
gine oil.
•
Tighten the cylinder head nuts in the proper
tightening sequence as shown and torque
them in two stages
•
cylinder head tightening sequence
(1
-»
2
-»
3
-
4
-»
2
-»
5
-»
6)
4. Install:
8camshaft sprocket
8timing chain
• • • • • • • • • • • • • • • • • • • • • • •
a.
b.
c.
d.
Turn the primary pulley counterclockwise.
Align the “I” mark a on the AC magneto
rotor with the stationary pointer b on the
crankcase cover.
Align the “I” mark c on the camshaft
sprocket with the stationary pointer d on
the plate.
Install the timing chain onto the camshaft
sprocket, and then install the camshaft
sprocket onto the camshaft.
NOTE:
8 When installing the camshaft sprocket, be
sure to keep the timing chain as tight as
possible on the exhaust side.
8 Align the slot on the camshaft with the tab
5-10
Downloaded
from
www.ScooterTime.net
