8199-201909
Clamp bolt
Adjusting the display angle
Adjust the display angle by loosening the clamp bolt. The
angle depends on each rider.
After adjustment, tighten the clamp bolt.
WARNING
Tighten the clamp bolt to 3.0–4.5 N·m (0.30–0.45
kgf·m, 2.2–3-3 lb·ft). During riding, vibration could
cause the clamp bolt to come loose with the risk that
the clamp may fall off. A loose display could distract
the rider or interfere with control.
Power “On/Off”
Each time you press the power switch, the power switches
between “On” and “Off”.
When you turn on the power, the animation will be dis-
played.
After that, the battery capacity indicator, speedometer, as-
sist power meter, Bluetooth indicator, the function display,
and “OFF” of assist mode indicator are displayed.
TIP
• When you turn on the power, the assist mode is auto-
matically set to Off mode.
• Keep your feet off the pedals when turning on the dis-
play unit. Also, do not start riding immediately after
turning on the display unit. Doing so could weaken the
assist power. (Weak assist power in either of these
cases is not a malfunction.) If you did either of the
above by accident, remove your feet from the pedals,
turn on the power again, and wait a moment (approxi-
mately two seconds) before starting to ride.
