SPEC
CABLE ROUTING DIAGRAM
15
1
Starter motor lead
2
Negative battery lead
3
Wire harness
4
Clamp
5
Taillight lead
6
Coolant reservoir tank breather
hose
7
Coolant reservoir hose
8
Positive battery lead
9
Starting circuit cut-off relay
0
Battery
å
Position the starter motor lead,
negative battery lead and wire
harness in the tank damper slit.
∫
Fasten the wire harness to the
frame with a plastic locking tie
and cut off the tie end.
ç
Do not allow the taillight lead to
slacken.
∂
Pass the starter motor lead and
negative battery lead over the
carburetor.
´
Fasten the coolant reservoir
tank breather hose and coolant
reservoir hose to the frame with
a plastic band.
ƒ
Pass the coolant reservoir hose
on the outside of the coolant
reservoir tank breather hose.
