Periodic maintenance and adjustment
7-14
1
2
3
4
5
6
7
8
9
10
11
12
4. If the engine oil is at or below the
minimum level mark, remove the
oil filler cap and add oil.
5. Check the engine oil filler cap
O-ring. Replace if damaged.
6. Install the engine oil filler cap.
To change the engine oil (and re-
place filter)
1. Start the engine, warm it up briefly,
and then turn it off.
2. Place an oil pan under the engine.
3. Remove the engine oil filler cap,
and then the engine oil drain bolt
and gasket.
TIP
Skip to step 8 if not replacing the oil fil-
ter element.
4. Remove the oil filter element cover
by removing the bolts.
5. Remove the oil filter element and
O-rings.
1. Engine oil filler cap
2. Maximum level mark
3. Minimum level mark
4. Engine oil level check window
1. Engine oil filler cap
2. O-ring
1
2
3
4
1
2
1. Engine oil drain bolt
2. Gasket
1
2
1. Oil filter element cover
2. Oil filter element cover bolt
1. O-ring
2. Oil filter element
1
2
1
2
2CF-9-16_E0.book 14 ページ ２０１８年５月１０日 木曜日 午後２時６分
Downloaded from
ManualsNet.com
