8-56
8
5. Wait for the headlight bulb to cool before
touching or removing it. Remove the
burnt-out bulb by pulling it out.
6. Place a new headlight bulb into position,
and then secure it with the bulb holder.
NOTICE:
Do not touch the glass part of
the headlight bulb to keep it free from
oil, otherwise the transparency of the
glass, the luminosity of the bulb, and
the bulb life will be adversely affected.
Thoroughly clean off any dirt and fin-
gerprints on the headlight bulb using a
cloth moistened with alcohol or thin-
ner.
[ECB00652]
7. Connect the headlight coupler.
8. Install the bulb cover and the cover at the
rear of the headlight.
NOTICE:
Make
sure the headlight bulb cover is se-
curely fitted over the bulb holder and
seated properly.
[ECB02210]
9. Adjust the headlight beam if necessary.
1. Do not touch the glass part of the bulb.
1
U2MB7BE0.book Page 56 Thursday, March 3, 2016 11:46 AM