5-12
5
TIP
If the electrical circuit for the fuel gauge is not
working correctly, all display segments will
flash repeatedly. Have a Yamaha dealer
check the vehicle.
Brightness control mode
This mode allows you to adjust the brightness
of the multi-function meter unit when the ve-
hicle is stopped.
To adjust the brightness
1. Push the “SELECT” button until the
brightness level is displayed.
2. Push the “RESET” button to set the
brightness level.
3. Push the “SELECT” button to confirm the
selected brightness level and exit the
brightness control mode.
Error code display
This model is equipped with a self-diagnosis
device for various electrical circuits.
1. Brightness level display
1
1. Error code display
2. Engine trouble warning light “
”
2
1
UBAN10E0.book Page 12 Thursday, August 8, 2019 10:46 AM