Yamaha Wolverine X2 Owner'S Manual Download Page 18

Page: 18 / 196

2-6

YAMAHA

B8K-F1696-00

WARNING

• Improper tire pressure or overloading this vehicle may

cause severe injury or death from loss of control or

rollover.

• Never set or allow tire pressure to be below the minimum.

Tire may dislodge from rim.

• VEHICLE LOAD of 0 lb (0 kg) ~ 441 lbs (200 kg)

Recommended: FRONT:

REAR:

Minimum:

FRONT:

REAR:

14 psi

13 psi

(97 kPa)

(90 kPa)

* Vehicle load is weight of operator, passenger,

accessories, cargo, and (if applicable) trailer tongue

weight. Do not exceed maximum vehicle load.

Gross Vehicle Weight Rating: 2866 lbs (1300 kg)

maximum including vehicle, weight of operator,

passenger, accessories, cargo, and (if applicable)

trailer tongue weight.

OPERATING TIRE PRESSURE: With tires cold, set as follows.

• VEHICLE LOAD of 441 lbs (200 kg) ~ 1270 lbs (576 kg)

Recommended: FRONT:

REAR:

Minimum:

FRONT:

REAR:

14 psi

23 psi

13 psi

22 psi

(97 kPa)

(159 kPa)

(90 kPa)

(152 kPa)

YAMAHA

BG4-F151K-00

WARNING

Improperly loading a trailer
or pulling an object can
affect handling, stability, and
risk of overturn or other
accidents.
• Secure load to prevent it

from shifting.

• Never load more than 620 N

(63 kgf)/141 lbf tongue
weight on towing bracket.

• Do not tow more than

8888 N(907 kgf)/2000 lbf
rolling weight (trailer plus
cargo).

• Tow or pull only from hitch

bracket.

• Read Owner’s Manual

before loading, towing, or
pulling objects.

8 YXE85WPHL/ YXE85WPAL/YXE85WPBL

UBAN10E0.book Page 6 Thursday, August 8, 2019 10:46 AM

Summary of Contents for Wolverine X2





































































































































































































Search results

Summary of Contents for Wolverine X2

Reviews:

Brands by name

Popular brands

Yamaha Wolverine X2, Owner'S Manual

Search results

Summary of Contents for Wolverine X2

Reviews:

Brands by name

Popular brands