manualshive.com logo in svg

Yamaha WaveRunner XL700 2004, Owner'S/Operator'S Manual, Page: 94 / 120

Share
Download
Yamaha WaveRunner XL700 2004 Owner'S/Operator'S Manual Download Page 94

4-13

E

EJU01891

Inspecting the jet thrust nozzle 
angle 

Check for smooth operation of the handle-

bars and jet thrust nozzle. 

Turn the handlebars as far as possible to

the right and left and check that the distance
between the jet thrust nozzle and the hull
are equal on right and left sides.

If steering is stiff or misadjusted, have a

Yamaha dealer service it.

Distance A and B: A=B

EJU01104 

Inspecting and adjusting the 
throttle cable  

Check that the throttle cable moves back

to the set position smoothly and that free
play is within specification. 
1. Squeeze and release the throttle lever. If

the lever does not return smoothly, have
a Yamaha dealer service it. 

2. Adjust free play 

a

 by loosening the lock-

nut 

1

 and turning the adjuster 

2

. 

Throttle lever free play: 

4–7 mm (0.16–0.28 in)

UF0M75.book  Page 13  Thursday, May 29, 2003  9:53 AM

Summary of Contents for WaveRunner XL700 2004

























































































































Reviews:

No comments