Trouble recovery
85
EJU34624
Emergency procedures
EJU34635
Cleaning the jet intake and impeller
WARNING
EWJ00783
Before attempting to remove weeds or de-
bris from the jet intake or impeller area,
shut the engine off and remove the clip
from the engine shut-off switch. Severe in-
jury or death could result from coming in
contact with the rotating parts of the jet
pump.
If weeds or debris gets caught in the jet intake
or impeller, cavitation can occur, causing jet
thrust to decrease even though engine speed
rises. If this condition is allowed to continue,
the engine will overheat and may seize.
NOTICE:
If weeds or debris gets caught in
the jet intake, do not operate the water-
craft above trolling speed until they have
been removed.
[ECJ00654]
If there is any sign that the jet intake or impel-
ler is clogged with weeds or debris, return to
shore and check the intake and impeller. Al-
ways stop the engine before beaching the
watercraft.
(1) Place a suitable clean cloth or carpeting
underneath the watercraft to protect it
from abrasions and scratches. Turn the
watercraft on its side as shown.
NOTICE:
Always turn the watercraft
over onto its port (left) side. When
turning the watercraft on its side, sup-
port the bow so that the handlebars
are not bent or damaged.
[ECJ00662]
ST
OP
UF2M73E0.book Page 85 Friday, August 2, 2013 11:28 AM
Summary of Contents for WaveRunner VX1800-N 2014
Page 12: ...General and important labels 6 3 4 UF2M73E0 book Page 6 Friday August 2 2013 11 28 AM ...
Page 13: ...General and important labels 7 UF2M73E0 book Page 7 Friday August 2 2013 11 28 AM ...
Page 97: ...UF2M73E0 book Page 3 Friday August 2 2013 11 28 AM ...
Page 98: ...Printed in U S A August 2013 0 7 1 CR UF2M73E0 book Page 1 Friday August 2 2013 11 28 AM ...