Instrument operation
35
EJU37433
Dual analog meter unit
The dual analog meter unit displays various
watercraft information.
Dual analog meter unit initial operation
When the dual analog meter unit is activated,
the speedometer and tachometer make one
sweep, all of the display segments and indi-
cator lights come on. After 2 seconds, the
“WARNING” indicator light and the warning
indicators in the information display go off,
and then the unit starts to operate normally.
TIP:
The “UNLOCK” indicator light will go off
when the engine is started.
Dual analog meter unit standby state
If the dual analog meter unit does not receive
any operation input within 25 seconds after
the engine stops, the unit will turn off and en-
ter a standby state. When the engine is start-
ed again, the displays return to their state
before the unit turned off, and then the unit
starts to operate normally.
EJU37444
Speedometer
The speedometer shows the watercraft
speed against water.
The small inner numbers on the meter show
the watercraft speed in kilometers per hour
“km/h” and the large outer numbers show the
speed in miles per hour “mph”.
EJU37245
Tachometer
The tachometer shows the engine speed.
The numbers on the meter show the engine
speed
×
1000 rpm (r/min).
1
Speedometer
2
Information display
3
Tachometer
4
“Hour Volt” button
5
“UNLOCK” indicator light
6
“L-MODE” indicator light
7
“WARNING” indicator light
1
2
3
7
6
5
4
UF3L72E0.book Page 35 Monday, July 27, 2015 4:47 PM
