Yamaha Warrior YFM350XRC Owner'S Manual Download Page 56

Page: 56 / 174

6-4

EBU01172

Drive select lever operation and reverse
driving

CAUTION:

Before shifting, stop the machine and re-
turn the throttle lever to its closed posi-
tion, otherwise the transmission may be
damaged.

NOTE:

When shifting into reverse, the clutch must be
disengaged.

1. Bring the machine to a complete stop

and return the throttle lever to the closed
position.

2. Pull in the clutch lever to disengage the

clutch.

3. Apply the brake pedal.
4. While pulling the knob, move the drive

select lever toward the rear until it com-
pletely stops.

NOTE:

When in reverse, the reverse indicator light
should be on. If the light does not come on,
ask a Yamaha dealer to inspect the machine.

5. Check behind you for people or obsta-

cles, and then release the brake pedal.

6. Open the throttle lever gradually and re-

lease the clutch lever slowly. Continue to
watch to the rear while backing.

1. Drive select lever

2. Knob

3. For forward drive

4. For reverse drive

U5NF12.book Page 4 Wednesday, May 8, 2002 11:11 AM

Summary of Contents for Warrior YFM350XRC















































































































































































Search results

Summary of Contents for Warrior YFM350XRC

Reviews:

Related manuals for Warrior YFM350XRC

Brands by name

Popular brands

Yamaha Warrior YFM350XRC, Owner'S Manual

Search results

Summary of Contents for Warrior YFM350XRC

Reviews:

Related manuals for Warrior YFM350XRC

Brands by name

Popular brands