Yamaha VZ150Z, Owner'S Manual

Page: 89 / 117

4-26
E
c C
8
Make sure the main switch (on applica-
ble models) is “OFF” before working on
the battery.
8
Reversal of the battery leads will dam-
age the rectifier.
8
Connect the RED lead first when
installing the battery and disconnect
the RED lead last when removing it.
Otherwise, the electrical system can be
damaged.
8
The electrical contacts of the battery
and cables must be clean and properly
connected, or the battery will not start
the engine.
Connect the RED lead to the POSITIVE (+)
terminal first. Then connect the BLACK
lead to the NEGATIVE (-) terminal.
UPP
ER
LEV
EL
LOW
ER
LE
VEL
000359
8
Using an accessory battery (option)
Use a connecting cable between the (-)
terminals of the starting battery and
accessory battery. See the illustrations of
the wiring connections. This cable must
be made from wire equivalent to the start-
ing battery cable
3
.
w
Use of smaller wire could lead to a fire.
1
Battery for starting
2
Battery for accessories
3
Large red lead for starting battery
4
Small red lead for accessory battery charg-
ing (optional part)
5
Large black lead
6
Negative connecting cable (optional part)
NOTE:
If a battery selector switch is desired, con-
sult your YAMAHA dealer about correct
wiring.
901014*
w
e r t y
q
68J-9-12-4 3/26/01 4:16 PM Page 27