Yamaha VMAX VMX12 Owner'S Manual Download Page 94 | Manualshive

Page: 94 / 110

background image

MOTORCYCLE CARE AND STORAGE

7-3

7

After cleaning

1. Dry the motorcycle with a chamois

or an absorbing cloth.

2. Use a chrome polish to shine

chrome, aluminum and stainless-
steel parts, including the exhaust
system. (Even the thermally in-
duced discoloring of stainless-
steel exhaust systems can be re-
moved through polishing.)

3. To prevent corrosion, it is recom-

mended to apply a corrosion pro-
tection spray on all metal,
including chrome- and nickel-plat-
ed, surfaces.

4. Use spray oil as a universal clean-

er to remove any remaining dirt.

5. Touch up minor paint damage

caused by stones, etc.

6. Wax all painted surfaces.
7. Let the motorcycle dry completely

before storing or covering it.

EWA00031

WARNING

@

●

Make sure that there is no oil or
wax on the brakes or tires.

●

If necessary, clean the brake
discs and brake linings with a
regular brake disc cleaner or ac-
etone, and wash the tires with
warm water and a mild deter-
gent. Before riding at higher
speeds, test the motorcycle’s
braking performance and cor-
nering behavior.

@

ECA00013

CAUTION:

@

●

Apply spray oil and wax spar-
ingly and make sure to wipe off
any excess.

●

Never apply oil or wax to any
rubber and plastic parts, but
treat them with a suitable care
product.

●

Avoid using abrasive polishing
compounds as they will wear
away the paint.

@

NOTE:

@

Consult a Yamaha dealer for advice on
what products to use.

@

E_3lr.book Page 3 Wednesday, November 22, 2000 4:10 PM

«
...
92
93
94
95
96
...
»

Summary of Contents for VMAX VMX12















































































































Reviews:

No comments

Related manuals for VMAX VMX12

Easyrack 6622520 01 01

Brand: hepco & becker Pages: 4

Advanced Million Color Mini Motorcycle Lighting Kit

Brand: LedGlow Pages: 3

SBL.04.650.10000/B

Brand: SW-Motech Pages: 2

Brand: Crivit Pages: 58

Brand: Yamaha Pages: 596

Brand: Yamaha Pages: 578

Brand: MOTO GUZZI Pages: 134

Brand: Eastwood Pages: 8

Brand: DYNATEK Pages: 4

1003007FONTANASPRINT

Brand: DYNATEK Pages: 7

Brand: Arai Helmet Pages: 20

Brand: hepco & becker Pages: 6

Brand: MZ Pages: 82

Brand: Leatt Pages: 26

Brand: Leatt Pages: 26

Brand: KYMCO Pages: 68

Brand: KYMCO Pages: 229

Brand: KYMCO Pages: 433

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands