Yamaha VL-1, Owner'S Manual

Page: 34 / 66

33
Getting Started
●
Setting Up
Setting Up
7.
Load the File
Loading will begin when you press the
-
button in response to the “
Are You
Sure?
” prompt. A bar graph on the display will indicate the progress of the load opera-
tion, and when all the data has been loaded “
Completed!
” will appear.
8.
Return to the Play Mode & Eject the Disk
When the “
Completed!
” display appears, press the
P
button to return to the
play mode, then press the eject button below the disk drive slot to eject the disk. Store
the disk in a safe place. You must now select a voice in order for the loaded data to be
properly activated — see the following section.
About the VL1 Data Disk
The floppy disk supplied with the VL1 contains the following files:
●
CUSTOMER:ALL
A complete set of 128 voices and system data in which the voices are
programmed to allow maximum controller variation. The MODULATION 2
wheel should be at its center position for “normal” sound.
●
FACTORY:ALL
A complete set of 128 voices and system data in which the voices are
programmed for easy playability — the controller range is not as broad as
the CUSTOMER.ALL voices.
●
EXAMPLE:ALL
Some example voices in which the controller settings are emphasized.