manualshive.com logo in svg

Yamaha VK540EG, Owner'S Manual, Page: 56 / 76

Share
Download
Yamaha VK540EG Owner'S Manual Download Page 56

8-15

ESU00188*

SUSPENSION

The suspension can be adjusted to suit rider preference. A
softer setting, for example, may provide greater rider
comfort, while a stiffer setting may allow more precise
handling and control over certain types of terrain or riding
conditions.

WARNING

Be sure this adjustment is serviced by a Yamaha
dealer.

Spring Preload

The spring preload can be adjusted by turning the adjuster

1

.

820-084

820-085

1

2

3

4

5

Softer

Harder

3

Spring adjuster position

Preload

Å

 Standard (Front)

1

2

3

4

5

6

7

Softer

Harder

4

Spring adjuster position

Preload

ı

 Standard (Rear)

B

A

WARNING

This shock absorber contains highly pressurized ni-
trogen gas.
It could explode by improper handling, causing injury
or property damage.

•••••

Do not tamper with or attempt to open the shock
absorber assembly.

•••••

Do not subject the shock absorber assembly to
open flame or other high heat, which could cause it
to explode.

•••••

Do not deform or damage the shock absorber in any
way.

•••••

Do not dispose of a damaged or worn out shock
absorber by yourself. Take the unit to your Yamaha
dealer.

Summary of Contents for VK540EG













































































Reviews:

No comments