Control functions
11
After the engine is started, the tachometer
makes one sweep, and the low coolant tem-
perature indicator light, the warning light, and
all segments of the meter display come on
and go off.
The grip warmer level is initially displayed for
5 seconds, then the display switches to the
fuel meter.
Odometer and tripmeter modes
Pushing the select/reset button switches the
display between the odometer mode “ODO”
and the tripmeter mode “TRIP” in the following
order:
ODO
→
TRIP
→
ODO
To reset the tripmeter, push the select/reset
button for at least one second while the trip-
meter is displayed.
TIP
To switch the speedometer, odometer, and
tripmeter displays between kilometers and
miles, select the odometer mode “ODO”, and
then push the select/reset button for at least
10 seconds while the snowmobile is stopped.
ESU10410
High beam indicator light “
”
The high beam indicator light comes on when
the high beams of the headlights are switched
on. (See page 15 for headlight beam switch
operation.)
ESU10482
Low coolant temperature indi-
cator light “
”
The low coolant temperature indicator light
comes on when the coolant temperature is
low and informs the rider that the snowmobile
should be warmed up. After the engine is
started, warm it up until the indicator light
goes off.
1. Tachometer
2. Low coolant temperature indicator
light “
”
3. High beam indicator light “
”
4. Warning light “
”
5. Meter display
6. Select/reset button
1. Odometer/tripmeter
1
2
4
3
5
6
1
1. High beam indicator light “
”
U8GS14E0.book Page 11 Wednesday, May 19, 2010 10:45 AM
