Yamaha VIKING YX70MPJ Owner'S Manual Download Page 147

Page: 147 / 170

8-52

clean off any dirt and fingerprints us-
ing a cloth moistened with alcohol or
thinner.

[ECB00653]

7. Connect the headlight coupler.
8. Install the bulb cover and the cover at the

rear of the headlight.

NOTICE:

Make

sure the headlight bulb cover is se-
curely fitted over the bulb holder and
seated properly.

[ECB02210]

9. Adjust the headlight beam if necessary.

EBU32681

Headlight beam adjustment

NOTICE

ECB00691

It is advisable to have a Yamaha dealer
make this adjustment.

To raise the beam, turn the headlight beam
adjusting screw in direction (a).
To lower the beam, turn the headlight beam
adjusting screw in direction (b).

1. Do not touch the glass part of the bulb.

1. Headlight beam adjusting screw

(a)

(b)

UB5F70E0.book Page 52 Monday, March 27, 2017 3:05 PM

Summary of Contents for VIKING YX70MPJ











































































































































































Search results

Summary of Contents for VIKING YX70MPJ

Reviews:

Related manuals for VIKING YX70MPJ

Brands by name

Popular brands

Yamaha VIKING YX70MPJ, Owner'S Manual

Search results

Summary of Contents for VIKING YX70MPJ

Reviews:

Related manuals for VIKING YX70MPJ

Brands by name

Popular brands