8-38
8
4. Slide the rubber cover back on the park-
ing brake cable.
5. Loosen the locknut.
6. Turn the adjusting nut in direction (a) to
increase the free play or in direction (b) to
decrease the free play.
7. Tighten the locknut, and then slide the
rubber cover to its original position.
EBU32550
Brake light switch adjustment
The brake light switch, which is activated by
the brake pedal, is properly adjusted when
the brake light comes on just before braking
takes effect. If necessary, adjust the brake
light switch as follows.
Turn the adjusting nut while holding the brake
light switch in place. To make the brake light
come on earlier, turn the adjusting nut in di-
rection (a). To make the brake light come on
later, turn the adjusting nut in direction (b).
1. Rubber cover
2. Adjusting nut
3. Locknut
1
(a)
(b)
2
3
1. Brake light switch
2. Adjusting nut
1
(a)
(b)
2
UB5F70E0.book Page 38 Monday, March 27, 2017 3:05 PM
