8-13
8
7. Insert the dipstick completely into the oil
filler hole, and then install the right rear
panel by installing the bolts and the quick
fastener screws.
8. Lower the cargo bed.
To change the engine oil (with or without
oil filter cartridge replacement)
1. Park the vehicle on a level surface.
2. Start the engine, warm it up for several
minutes, and then turn it off.
3. Lift the cargo bed up. (See page 4-23 for
cargo bed lifting and lowering proce-
dures.)
4. Remove the right rear panel by removing
the quick fastener screws and bolts.
5. Place an oil pan under the engine to col-
lect the used oil, and then remove the
dipstick.
6. Remove the engine oil drain bolt and its
gasket to drain the oil from the crank-
case.
1. Right rear panel
2. Quick fastener screw
3. Bolt
1
2
3
1. Right rear panel
2. Quick fastener screw
3. Bolt
1
2
3
UB4210E0.book Page 13 Tuesday, April 28, 2015 1:25 PM
