Yamaha Venture XVZ1300TF, Owner'S Manual

Page: 86 / 132

PERIODIC MAINTENANCE AND MINOR REPAIR
7-13
7
3. Remove the engine oil filler cap
and drain bolt to drain the oil from
the crankcase.
NOTE:
@
Skip steps 4–6 if the oil filter cartridge is
not being replaced.
@
4. Remove the oil filter cartridge with
an oil filter wrench.
NOTE:
@
An oil filter wrench is available at a
Yamaha dealer.
@
5. Apply a thin coat of engine oil to
the O-ring of the new oil filter
cartridge.
NOTE:
@
Make sure that the O-ring is properly
seated.
@
6. Install the new oil filter cartridge,
and then tighten it to the specified
torque with a torque wrench.
7. Install the engine oil drain bolt, and
then tighten it to the specified
torque.
1. Engine oil drain bolt 1. Engine oil filter cartridge 1. Torque wrench
2. Oil filter wrench
Tightening torque:
Oil filter cartridge:
17 Nm (1.7 m·kgf)
Tightening torque:
Engine oil drain bolt:
43 Nm (4.3 m·kgf)
E_5jc.book Page 13 Monday, January 22, 2001 12:12 PM