Pre-operation checks
34
ESU11071
Inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition.
Always follow the inspection and maintenance procedures and schedules described in the
Owner’s Manual.
WARNING
EWS00191
Failure to inspect or maintain the vehicle properly increases the possibility of an acci-
dent or equipment damage. Do not operate the vehicle if you find any problem. If a prob-
lem cannot be corrected by the procedures provided in this manual, have the vehicle
inspected by a Yamaha dealer.
ESU11081
Pre-operation check list
ITEM
CHECKS
PAGE
Fuel
• Check fuel level.
• Refuel if necessary.
• Check fuel line for leakage.
Engine oil
• Check oil level in engine.
• If necessary, add recommended oil to specified
level.
• Check vehicle for oil leakage.
Coolant
• Check coolant level.
• Add if necessary.
V-belt
• Check for wear and damage.
• Replace if necessary.
Drive guard
• Make sure the drive guard is installed securely.
• Check the drive guard mounts for damage.
Brake
• Check operation.
• If soft or spongy, have Yamaha dealer bleed hy-
draulic system.
• Check brake pads for wear.
• Replace if necessary.
• Check fluid level in master cylinder.
• If necessary, add recommended brake fluid to
specified level.
• Check hydraulic system for leakage.
Air filter
• Check that there is no snow under the air filter ele-
ment.
• If necessary, brush off the snow.
Tool kit and recommended
equipment
• Check for proper placement.
Shroud and covers
• Make sure that the shroud and covers are securely
fastened.
Skis and ski runners
• Check for wear and damage.
• If necessary, have Yamaha dealer replace skis or
ski runners.
U8GK15E0.book Page 34 Thursday, April 21, 2011 11:43 AM
