PERIODIC MAINTENANCE AND MINOR REPAIR
6-13
6
2. Remove the oil filler bolt and drain
bolt to drain the oil from the final
gear case.
3. Install the final gear oil drain bolt,
and then tighten it to the specified
torque.
4. Add the recommended final gear
oil to the brim of the filler hole.
NOTE:
GL4 is a quality rating. Hypoid gear oils
rated GL5 or GL6 may also be used.
5. Install and tighten the oil filler bolt.
6. Check the final gear case for oil
leakage. If oil is leaking, check for
the cause.
EAU20670
Cleaning the air filter element
The air filter element should be cleaned
as follows at the intervals specified in
the periodic maintenance and lubrica-
tion chart. Clean the air filter element
more frequently if you are riding in un-
usually wet or dusty areas.
1. Remove the air filter case cover by
removing the screws.
2. Pull the air filter element out.
3. Lightly tap the air filter element to
remove most of the dust and dirt,
and then blow the remaining dirt
out with compressed air as shown.
If the air filter element is damaged,
replace it.
4. Insert the air filter element into the
air filter case as shown.
Tightening torque:
Final gear oil drain bolt:
23 Nm (2.3 m·kgf, 16.5 ft·lbf)
Recommended final gear oil:
Hypoid gear oil SAE 80 (API GL4) or
multi-grade hypoid gear oil SAE
80W-90
Oil quantity:
0.20 L (0.21 US qt) (0.18 Imp.qt)
1. Air filter case cover
2. Screw
1. Air filter element
2. Projection
3. Slot
5YS10.book Page 13 Wednesday, May 14, 2003 6:32 PM
Summary of Contents for V-Star XVS1100S
Page 1: ...5YS 28199 10 LIT 11626 17 24 XVS1100S C XVS1100AS C XVS1100ATS C OWNER S MANUAL...
Page 2: ...EAU10041 5YS10 book Page 1 Wednesday May 14 2003 6 32 PM...
Page 94: ...CONSUMER INFORMATION 9 8 9 5YS10 book Page 8 Wednesday May 14 2003 6 32 PM...
Page 99: ...PRINTED IN JAPAN 2003 05 3 3 2 CR E PRINTED ON RECYCLED PAPER YAMAHA MOTOR CO LTD...