8
Parts and Functions
1
Power LED
This LED lights up when the USB
terminal is connected and the
power is being supplied to the
UX96.
2
Terminal LEDs
These LEDs light up when MIDI
signal passes through the
corresponding terminals.
3
TO TG/INST terminal
Connect this terminal to the TO
HOST terminal on the MIDI device.
Use an optional 8-pin system
peripheral cable for Apple
Macintosh for connection.
Set the HOST SELECT switch of
the connected MIDI device to
“PC-1” or “Mac,” regardless of
the computer you are using.
4
MIDI OUT terminal
This terminal transmits MIDI signals
to connected MIDI devices. Use an
optional MIDI cable for connection.
5
MIDI IN terminal
This terminal receives MIDI signals
from connected MIDI devices. Use
an optional MIDI cable for
connection.
6
USB terminal
Connect this terminal to a
computer or a USB hub using a
USB cable.
USB-MIDI INTERFACE
MIDI IN
MIDI OUT
TO TG/INST
1
2
6
5
4
3
NOTE