Yamaha UX16 Owner'S Manual Download Page 2

 

SPECIAL MESSAGE SECTION

 

This product utilizes an external power supply 
(adapter). DO NOT connect this product to any 
power supply or adapter other than one 
described in the manual, on the name plate, or 
specifically recommended by Yamaha.

 

WARNING: 

 

Do not place this product in a 

position where anyone could walk on, trip over, 
or roll anything over power or connecting cords 
of any kind. The use of an extension cord is not 
recommended! If you must use an extension 
cord, the minimum wire size for a 25' cord (or 
less) is 18 AWG. NOTE: The smaller the AWG 
number, the larger the current handling capacity. 
For longer extension cords, consult a local 
electrician.
This product should be used only with the 
components supplied or; a cart, rack, or stand 
that is recommended by Yamaha. If a cart, etc., 
is used, please observe all safety markings and 
instructions that accompany the accessory 
product.

 

SPECIFICATIONS SUBJECT TO 
CHANGE: 

 

The information contained in this manual is 
believed to be correct at the time of printing. 
However, Yamaha reserves the right to change 
or modify any of the specifications without notice 
or obligation to update existing units.

Do not attempt to service this product beyond 
that described in the user-maintenance 
instructions. All other servicing should be 
referred to qualified service personnel.

This product, either alone or in combination with 
an amplifier and headphones or speaker/s, may 
be capable of producing sound levels that could 
cause permanent hearing loss. DO NOT operate 
for long periods of time at a high volume level or 
at a level that is uncomfortable. If you experience 
any hearing loss or ringing in the ears, you 
should consult an audiologist. IMPORTANT: The 
louder the sound, the shorter the time period 
before damage occurs.

Some Yamaha products may have benches and/
or accessory mounting fixtures that are either 
supplied with the product or as optional 
accessories. Some of these items are designed 
to be dealer assembled or installed. Please 
make sure that benches are stable and any 
optional fixtures (where applicable) are well 
secured BEFORE using. Benches supplied by 
Yamaha are designed for seating only. No other 
uses are recommended.

 

NOTICE: 

 

Service charges incurred due to a lack of 
knowledge relating to how a function or effect 
works (when the unit is operating as designed) 
are not covered by the manufacturer's warranty, 
and are therefore the owners responsibility. 
Please study this manual carefully and consult 
your dealer before requesting service.

 

ENVIRONMENTAL ISSUES: 

 

Yamaha strives to produce products that are 
both user safe and environmentally friendly. We 
sincerely believe that our products and the 
production methods used to produce them, meet 
these goals. In keeping with both the letter and 
the spirit of the law, we want you to be aware of 
the following:

 

Disposal Notice: 

 

Should this product become damaged beyond 
repair, or for some reason its useful life is 
considered to be at an end, please observe all 
local, state, and federal regulations that relate to 
the disposal of products that contain lead, 
batteries, plastics, etc. If your dealer is unable to 
assist you, please contact Yamaha directly.

 

NAME PLATE LOCATION: 

 

The name plate is located on the bottom of the 
product. The model number, serial number, 
power requirements, etc., are located on this 
plate. You should record the model number, 
serial number, and the date of purchase in the 
spaces provided below and retain this manual as 
a permanent record of your purchase.

 

Model

 

Serial No.

 

Purchase Date

 

PLEASE KEEP THIS MANUAL

 

93-DC

 

* Please make a note of the model number, the serial number and the purchase date.

Summary of Contents for UX16
































Reviews: