FRONT FORK SPRING PRELOAD ADJUSTMENT
3-25
CC
CAUTION:
Tighten the pinch bolts to specified
torque. If torqued too much, it may cause
the front fork to malfunction.
NOTE:
• Adjust the installation angle of the steering
damper stay so that the dimension
d
is
between 3 mm (0.12 in) and 5 mm (0.20 in)
when the handlebar is turned fully to the
left.
• Tighten the pinch bolt (steering damper
stay) toward the front of the chassis.
4. Check:
• Steering smooth action
Turn the handlebar to make sure no parts
are being contacted with others.
Contact
≥
Repair.
5. Install:
• Front fender
• Front wheel
• Cowling
EC36F012
FRONT FORK SPRING PRELOAD ADJUST-
MENT
1. Adjust:
• Spring preload
By turning the adjuster
1
.
Stiffer
a
a
≥
≥
Increase the spring preload.
(Turn the adjuster
1
1
in.)
Softer
b
b
≥
≥
Decrease the spring preload.
(Turn the adjuster
1
1
out.)
INSP
ADJ
Extent of adjustment:
Maximum
Minimum
Fully turned-in
Fully turned-out
position
position
]
Summary of Contents for TZ125M1
Page 1: ...4JT 28199 16 LIT 11626 13 42 OWNER S SERVICE MANUAL TZ125M1 M ...
Page 11: ...MEMO ...
Page 257: ...99 8 0 1x1 ...