Yamaha Tyros5-76, Owner'S Manual

Page: 62 / 128

62 Tyros5 Owner’s Manual
The key which divides the keyboard into two sections is referred to as “Split Point.” These are three Split Points: Split
Point (LEFT), Split Point (RIGHT 3), and Split Point (STYLE).
• Split Point (LEFT): .......... Divides the keyboard into the left-hand (LOWER) section and the right-hand (UPPER)
section.
• Split Point (RIGHT 3): ..... Divides the right-hand (UPPER) section into the RIGHT 1-2 Voices section and the
RIGHT 3 Voice section.
• Split Point (STYLE): ........ Divides the left-hand (LOWER) section into the Chord section and the LEFT Voice sec-
tion.
1
Call up the Split Point display.
[FUNCTION]

[C] STYLE SETTING/SPLIT POINT/CHORD FINGERING

TAB [

][

] SPLIT POINT
2
Set the Split Point.
Setting the Split Point
Split Point
(RIGHT 3) Split Point
(LEFT) Split Point
(STYLE)
Chord section
LEFT Voice
section
RIGHT 1–2
Voices section
RIGHT
3 Voice
section
Left-hand (LOWER) section
Right-hand (UPPER)
section
You also can specify each Split Point by
note name, using the [3

]–
[8

] buttons. Split Point (STYLE)
is indicated by “STYLE,” Split Point
(LEFT) is indicated by “LEFT,” and Split
Point (RIGHT 3) is indicated by “RIGHT
3.”
NOTE
[F] Split Point
(STYLE + LEFT) Sets Split Point (STYLE) and Split Point (LEFT) to the same note. Press the [F] but-
ton and rotate the [DATA ENTRY] dial. You can also specify the Split Point directly
from the keyboard by pressing the desired key on the keyboard while holding the [F]
button.
[G] Split Point
(STYLE) Sets each Split Point individually. Press one of the desired buttons and rotate the
[DATA ENTRY] dial. You can also specify the Split Point directly from the keyboard
by pressing the desired key on the keyboard while holding one of the [G]–[I] buttons.
[H] Split Point
(LEFT)
[I] Split Point
(RIGHT 3)
Chord + LEFT
Voice section
Split Point (STYLE + LEFT)
Right-hand section
(Left-hand section)
Split Point (LEFT) cannot be set lower than Split Point (STYLE), and Split Point (RIGHT 3) cannot be set
lower than Split Point (LEFT).
NOTE