Yamaha Tyros5-76, Owner'S Manual

Page: 48 / 128

48 Tyros5 Owner’s Manual
You can apply various effects to enhance or change the sound of the keyboard parts (Left, Right 1, 2 and 3). The effects
can be turned on or off by using the following buttons.

HARMONY/ECHO ... page 49
This applies appropriate harmony notes to the notes played in the Right-hand section.

INITIAL TOUCH
This button turns the touch response of the keyboard on or off. When off, the same volume
is produced no matter how strongly or softly you play the keyboard.

SUSTAIN
When this Sustain function is on, all notes played on the keyboard with right-hand part
(RIGHT 1, 2, 3) have a longer sustain.

MONO
When this button is on, the part’s Voice is played monophonically (only one note at the
time) with last note priority, letting you play single, lead sounds such as brass instruments
more realistically. Depending on the Voice, Portamento may be produced when notes are
played with legato.
When this button is off, the part’s Voice played polyphonically.

DSP/DSP VARIATION
With the digital effects built into the instrument, you can add ambience and depth to your
music in a variety of ways—such as adding reverb that makes you sound like you are play-
ing in a concert hall.
The [DSP] button is used to turn the DSP (Digital Signal Processor) effect on or off for the
currently selected keyboard part.
The [VARIATION] button is used to change between variations of the DSP effect. For
example, this could be used to change the rotating speed (slow/fast) of the rotary speaker
effect while you play.
Applying Voice Effects
These effects only apply to the selected
part (the PART SELECT
bu tton is on).
Portamento is a function that creates a
smooth transition in pitch from the first
note played on the keyboard to the next.
NOTE
The effect type can be changed. On the
Voice Selection display, select [5

]
(VOICE SET)

TAB [

][

] EFFECT/
EQ

[A]/[B] 2 DSP.
NOTE