Page 11
5.2
MIDI settings on keyboard
In order to select the registration by MIDI commands from S, the keyboard needs
some corresponding MIDI settings.
We assume here that the MIDI channel 1 is used to control the keyboard and that the iPad is
connected to PORT 1 (MIDI A/USB 1/WLAN). If you want to use another MIDI channel or
another PORT, you need to specify it as needed.
2. Select the
RECEIVE
tab
.
3. Select at
PORT 1 CH1
the part
KEYBOARD
5. For stable use, you should not send any unnecessary
MIDI signals to the port where S is connected.
Therefore you should set all to OFF.
But at least you must avoid sending any other Control
Changes (CC) or Program Changes (PC) to the iPad on
channel 1 that is used to remote control S.
4. Select the
TRANSMIT
tab
1. Press the
FUNCTION
button on the keyboard,
then select the
MIDI
tab, then press
EDIT
to
enter into the MIDI Setup.
Tip:
Save the MIDI
settings in the USER
section e.g. with the
name S.
