Yamaha TW200P, Owner'S Manual

Page: 85 / 109

6-42
PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
3
4
5
6
7
8
9
3. Insert the wheel axle, and then
install the axle nut.
4. Lower the front wheel so that it is
on the ground.
5. Tighten the axle nut to the speci-
fied torque.
6. Connect the speedometer cable.
Tightening torque:
Axle nut:
90 Nm (9.0 m·kgf, 65 ft·lb)
EAU03519
Rear wheel
To remove the rear wheel
EW000122
w
8
It is advisable to have a
Yamaha dealer service the
wheel.
8
Securely support the motorcy-
cle so that there is no danger
of it falling over.
1. Loosen the axle nut.
1. Axle nut
2. Brake pedal free play adjusting nut
3. Brake rod
4. Brake camshaft lever
5. Drive chain adjusting plate
5
a
2
1
3
4
2. Remove the brake pedal free
play adjusting nut, and then dis-
connect the brake rod from the
brake camshaft lever.
3. Turn the drive chain adjusting
plate on each side of the
swingarm fully in direction
a
.
4. Lift the rear wheel off the ground
according to the procedure on
page 6-40.
5. Remove the axle nut, and then
pull the wheel axle out.
6. Push the wheel forward, and
then remove the drive chain from
the rear sprocket.
NOTE:
The drive chain does not need to be
disassembled in order to remove and
install the wheel.
7. Remove the wheel.
5FY-9-14 (TW200, USA) 5/11/01 8:31 AM Page 81