Yamaha TT-R250, Owner'S Manual

Page: 24 / 88

INSTRUMENT AND CONTROL FUNCTIONS
3-7
2
3
4
5
6
7
8
9
EAU13960
Seat
To remove the seat
1. Remove the bolts, and then pull
the seat off.
To install the seat
1. Insert the projections on the front
of the seat into the seat holders as
shown.
2. Place the seat in the original posi-
tion, and then tighten the bolts.
NOTE:
Make sure that the seat is properly se-
cured before riding.
EAU14671
Adjusting the front fork
The front fork is equipped with air
valves for adjusting the spring rate and
screws for adjusting the damping force.
WARNING
EWA10190
There should be no difference in air
pressure between the fork legs.
Spring rate
The total spring rate is adjusted by
changing the air pressure as follows.
1. Lift the front wheel off the ground
according to the procedure on
page 6-31.
NOTE:
When checking and adjusting the air
pressure, there should be no weight on
the front end of the vehicle.
2. Remove the air valve cap from
each fork leg.
1. Bolt
1
(
×
2 )
1. Projection
2. Seat holder
1
(
×
2 )
2
(
×
2 )