Yamaha TT-R125EY, Service Manual

Page: 218 / 258

5-46
CHAS
HANDLEBAR
Handlebar
1. Install:
• Handlebar
1
• Handlebar holder
2
• Main switch
3
• Main switch holder
4
• Bolt (handlebar holder)
5
• Align the punched mark
a
on the handlebar
with the upper surface of the handlebar holder
on the upper bracket.
• The handlebar holder should be installed with
the punched mark
b
forward.
• First tighten the bolts on the front side of the
handlebar holder, and then tighten the bolts
on the rear side.
ASSEMBLY AND INSTALLATION
Throttle grip assembly
1. Install:
• Collar
1
• Handlebar grip (right)
2
Apply the adhesive on the tube guide
3
.
Before applying the adhesive, wipe off grease
or oil on the tube guide surface
a
with a lacquer
thinner.
23 Nm (2.3 m · kg, 17 ft · lb)
TIP
TIP