Yamaha TT-R125A Owner'S Manual Download

Page: 81 / 92

PERIODIC MAINTENANCE AND ADJUSTMENT

7-35

EAU25902

Troubleshooting chart

Check the fuel level in
the fuel tank.

1. Fuel

There is enough fuel.

There is no fuel.

Check the compression.

Supply fuel.

The engine does not start.
Check the compression.

Operate the electric starter.

2. Compression

There is compression.

There is no compression.

Check the ignition.

Have a Yamaha dealer
check the vehicle.

Remove the spark plug
and check the electrodes.

3. Ignition

Wipe off with a dry cloth and correct the
spark plug gap, or replace the spark plug.

Have a Yamaha dealer check the vehicle.

The engine does not start.
Have a Yamaha dealer
check the vehicle.

The engine does not start.
Check the battery.

Operate the electric starter.

4. Battery

The engine turns over
quickly.

The engine turns over
slowly.

The battery is good.

Check the battery lead connections,
and charge the battery if necessary.

Dry

Wet

Open the throttle halfway and operate
the electric starter.

U39C81E0.book Page 35 Monday, April 26, 2010 2:43 PM

ProCarManuals.com

Summary of Contents for TT-R125A





























































































Search results

Summary of Contents for TT-R125A

Reviews:

Related manuals for TT-R125A

Brands by name

Popular brands

Yamaha TT-R125A, Owner'S Manual

Search results

Summary of Contents for TT-R125A

Reviews:

Related manuals for TT-R125A

Brands by name

Popular brands