Yamaha TT-R 110 Owner'S Manual Download Page 37

Page: 37 / 88

INSTRUMENT AND CONTROL FUNCTIONS

4-10

With the engine turned off:
1. Make sure that the engine stop switch is set to “

”.

2. Turn the key to “ON”.
3. Shift the transmission into gear.
4. Keep the front or rear brake applied.
5. Push the start switch.

Does the engine start?

The neutral switch may not be working correctly.

The motorcycle should not be ridden

until

checked by a Yamaha dealer.

6. Shift the transmission into the neutral position.
7. Push the start switch.

Does the engine start?

The neutral switch may not be working correctly.

The motorcycle should not be ridden

until

checked by a Yamaha dealer.

YES

The system is OK.

The motorcycle can be ridden.

YES

If a malfunction is noted, have a Yamaha
dealer check the system before riding.

WARNING

UB5180E0.book Page 10 Monday, June 9, 2014 1:20 PM

Summary of Contents for TT-R 110

























































































Search results

Summary of Contents for TT-R 110

Reviews:

Related manuals for TT-R 110

Brands by name

Popular brands

Yamaha TT-R 110, Owner'S Manual

Search results

Summary of Contents for TT-R 110

Reviews:

Related manuals for TT-R 110

Brands by name

Popular brands