Yamaha TSX-N237 Page 54 Owner'S Manual Download

Page: 54 / 59

Messages in the display

Message

Description

Solution

No Disc

The disc inserted in the unit may not be supported.

Use the disc supported by the unit (

p. 55).

The disc may be dirty, or foreign matter may be attached to it.

Wipe the disc clean. Alternatively, remove foreign matter adhered to the disc.

Reading

The unit is reading the specified file/content.

Wait until the unit finishes reading.

Unknown disc

Disc is set upside-down.

Set the disc with the labeled side facing up.

A disc that is not recognized by the unit has been inserted.

Confirm that the disc is supported by the unit (

p. 55).

Unknown device

A disc or USB flash drive that is not recognized by the unit has been
inserted or connected.

Confirm that the disc or USB flash drive is supported by the unit (

p. 55).

No content

A disc or USB flash drive does not contain files supported by the
unit.

Use the disc or USB flash drive that contains files supported by the unit
(

p. 55).

Read error

The unit failed to read the specified file/content.

Eject the disc or disconnect the USB flash drive, and then insert the disc or
connect the USB flash drive again.

(Bluetooth) is not connected

The Bluetooth connection is not established.

Confirm the Bluetooth connection.

Summary of Contents for TSX-N237




























































Search results

Summary of Contents for TSX-N237

Reviews:

Related manuals for TSX-N237

Brands by name

Popular brands

Yamaha TSX-N237, Owner'S Manual

Search results

Summary of Contents for TSX-N237

Reviews:

Related manuals for TSX-N237

Brands by name

Popular brands