background image

10

CD preventive care

• This compact disc player is designed for use with the

following types of discs only. Never attempt to load any
other type of disc into the unit. The unit can also play
8-cm (3-inch) compact discs.

• Be sure to use only CD-R and CD-RW discs made by

reliable manufacturers.

• Compact discs are not subjected to wear during play,

but damage to the disc surface when the disc is being
handled can adversely affect disc play.

• Do not use cleaning discs or warped discs. All of these

could damage the unit.

To prevent malfunction of this unit

• Do not use any non-standard shaped CD (heart, etc.)

available on the market, because it may damage the
unit.

• Do not use a CD with tape, seals, or paste on it, because

damage to the unit may result.

No!

• Compact discs are not affected by small particles of

dust or fingerprints on their playing surface, but even so
they should be kept clean. Wipe by using a clean, dry
cloth. Do not wipe with a circular motion; wipe straight
outward from the center.

• Do not try to clean the disc’s surface by using any type

of disc cleaner, record spray, antistatic spray or liquid,
or any other chemical-based liquid, because such
substances might irreparably damage the disc’s surface.

• Do not expose discs to direct sunlight, high temperature

or high humidity for a long period of time, because
these might warp or otherwise damage the disc.

GETTING STARTED

;;

;

;

;

 

Removing the front cover of the speakers

The front cover is fastened to the enclosure at four points and can be removed if desired. To remove the cover, hold on to
both sides and slowly pull straight away from the speaker. To reattach, line up the four holes on the inner surface of the
cover with the four corresponding pegs on the speaker and push gently.

Note

When the cover is removed, be sure not to touch the speaker units with your hands or to exert excessive force on them.

NX-TS20

NX-TS10

04/TSX-10E(6.12)e

01.6.12, 4:17 PM

10

Summary of Contents for TSX-20





























Reviews: