Yamaha Tricity MW125, Owner'S Manual

Page: 68 / 84

PERIODIC MAINTENANCE AND ADJUSTMENT
6-29
6
EAU23765
Replacin g the hea d li g ht b ul b
This model is equipped with a halogen
bulb headlight. If the headlight bulb
burns out, replace it as follows.
NOTICE
ECA10651
Take care not to d ama g e the follow-
in g parts:

Hea d li g ht b ul b
Do not touch the g lass part of
the hea d li g ht b ul b to keep it free
from oil, otherwise the transpar-
ency of the
g lass, the luminosity
of the b ul b , an d the b ul b life will
b e a d versely affecte d . Thor-
ou g hly clean off any d irt an d fin-
g erprints on the hea d li g ht b ul b
usin g a cloth moistene d with al-
cohol or thinner.

Hea d li g ht lens
Do not affix any type of tinte d
film or stickers to the hea d li g ht
lens.
Do not use a hea
d li g ht b ul b of a
watta g e hi g her than specifie d .
1. Disconnect the headlight coupler,
and then remove the headlight
bulb cover.
2. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
3. Place a new headlight bulb into
position, and then secure it with
the bulb holder.
4. Install the headlight bulb cover,
and then connect the coupler.
5. Have a Yamaha dealer adjust the
headlight beam if necessary.
1. Do not touch the glass part of the bulb.
1. Headlight coupler
2. Headlight bulb cover
1
2
1. Headlight bulb holder
1
U2CME0E0.book Page 29 Friday, May 2, 2014 2:55 PM