Yamaha TransAcoustic SHTA Series, Maintenance Handbook

Page: 8 / 18

10. PEQ Data Transfer of SWBOX Replacement
[Start-up]
[Testing items]
Saving PEQ data from SWBOX to the USB drive
Loading PEQ data from the USB drive to SWBOX
[Test mode operation procedures]
1) Start-up the test mode.
2) Push the [+/YES] or [-/NO] button to select desired testing item.
3) Push the [PLAY] button to start-up the selected testing item.
4) Execute the selected testing item according to the procedure below.
5) Push the [PLAY] button to terminate the testing item and redo step 2.
6) Turn the power off or select "t49" to terminate the test mode.
Before the SWBOX is replaced, please transfer the PEQ data to the new SWBOX by saving the PEQ data to the
USB drive in test mode, then please return the PEQ data to the SWBOX after the replacement.
Please refer to the "2. Summary of TransAcoustic
TM
Technology (Page 5)" for PEQ data.
Panel buttons [REC] + [PLAY] + POWER ON
Mode
Method
Operation
Display
Test mode
Lod
Sav
In addition to the conventional test mode for PEQ data transfer, two modes have been added.
Test No.
Testing item
Execute the
selected testing
item
Completed test
[+/YES]
[PLAY]
[PLAY]
[+/YES]
[+/YES]
[-/NO]
[-/NO]
[PLAY]
…
[+/YES]
[-/NO]
[+/YES]
[-/NO]
[+/YES]
[-/NO]
Saving PEQ data from SWBOX to the
USB drive Loading PEQ data from the USB
drive to SWBOX
PEQ data
OLD SWBOX NEW SWBOX
- 8 -