Perio
d
ic maintenance an
d
a
d
justment
7-32
7
If a fuse is blown, replace it as follows.
1. Turn the key to “OFF” and turn off
the electrical circuit in question.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage.
WARNING! Do not
use a fuse of a hi
g
her ampera
g
e
ratin
g
than recommen
d
e
d
to
avoi
d
causin
g
extensive
d
am-
a
g
e to the electrical system an
d
possi
b
ly a fire.
[EWA15132]
3. Turn the key to “ON” and turn on
the electrical circuit in question to
check if the device operates.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
1. Parking lighting fuse
2. Headlight fuse
3. Plug +12V fuse (DC connector, option)
4. Plug +12V fuse (DC jack)
5. Cruise control fuse
6. Brake light fuse
7. Signaling system fuse
8. Fog lamp fuse (option)
9. ABS control unit fuse
10.Seat heater fuse (option)
11.Ignition fuse
12.Spare fuse
1
2
3
4
12
12
11
12
10
9
8
7
6
5
Specifie
d
fuses:
Main fuse:
50.0 A
Fuel injection system fuse:
20.0 A
Specifie
d
fuses (fuse
b
ox 1):
Radiator fan motor fuse:
15.0 A
ABS motor fuse:
30.0 A
ABS solenoid fuse:
15.0 A
Backup fuse:
7.5 A
Electronic throttle valve fuse:
7.5 A
Specifie
d
fuses (fuse
b
ox 2):
Fog lamp fuse:
2.0 A
Brake light fuse:
1.0 A
Signaling system fuse:
7.5 A
Ignition fuse:
15.0 A
ABS control unit fuse:
7.5 A
Seat heater fuse:
7.5 A
Specifie
d
fuses (fuse
b
ox 3):
Headlight fuse:
7.5 A
Parking lighting fuse:
10.0 A
Cruise control fuse:
1.0 A
Plug +12V fuse:
2.0 A
Plug +12V fuse:
2.0 A
UB1J10E0.book Page 32 Tuesday, April 3, 2018 8:30 AM
