Instrument an
d
control functions
5-14
5
To unpause the timer, push the dim-
mer/pass switch down towards
“PASS” and the timer will resume with-
out counting a new lap.
To exit the lap time mode, turn it off in
the settings MENU. (See page 5-15.)
TIP
The engine must be running to
start the lap timer.
The headlight will flash when the
dimmer/pass switch is pressed.
Whenever the lap timer is paused,
it can be resumed using the dim-
mer/pass switch.
Brake control icon “BC”
This icon is replaced by the auxiliary
system warning and coolant tempera-
ture warning indicators when they are
activated.
For more information on the BC sys-
tem see “BC” on page 4-7.
Error mo
d
e warnin
g
“Err”
When an internal error occurs (e.g.,
communication with a system control-
ler has been cut off), the error mode
warning will appear as follows.
“Err” and “
” indicator light indicates
an ECU error.
“Err” and the SCU trouble
warning “
” indicates a SCU error.
“Err” only indicates an ABS ECU error.
TIP
Depending on the nature of the error,
the display may not function properly
and the TCS settings may be impossi-
ble to change. Additionally, the ABS
may not function properly. Use extra
care when braking and have a Yamaha
dealer check the vehicle immediately.
SCU trou
b
le warnin
g
“
”
This icon appears if a problem is de-
tected in the front or rear suspension.
Auxiliary system warnin
g
“
”
This icon appears if a problem is de-
tected in a non-engine-related system.
Coolant temperature warnin
g
“
”
This icon appears if the coolant tem-
perature reaches 116 °C (241 °F) or
higher. Stop the vehicle and turn off the
engine. Allow the engine to cool.
NOTICE
ECA10022
Do not continue to operate the en-
g
ine if it is overheatin
g
.
Oil pressure warnin
g
“
”
This icon appears when the engine oil
pressure is low. When the vehicle is
first turned on, engine oil pressure has
yet to build, so this icon will come on
and stay on until the engine has been
started.
TIP
If a malfunction is detected, the oil
pressure warning icon will flash repeat-
edly.
NOTICE
ECA26410
Do not continue to operate the en-
g
ine if the oil pressure is low.
UBAP10E0.book Page 14 Tuesday, January 19, 2021 9:49 AM
