Periodic maintenance and adjustment
7-38
1
2
3
4
5
6
7
8
9
10
11
12
13
14
EAU61545
Emergency mode
When the smart key is lost, damaged,
or its battery has discharged, the vehi-
cle can still be turned on and the engine
started. You will need a mechanical key
and the smart key system identification
number. (See page 3-3.) To operate
the vehicle in emergency mode, carry
out the following steps.
TIP
Emergency mode operation will be
cancelled if the respective steps are not
carried out within the time set for each
operation or if the “OFF/LOCK” switch
is pushed.
1. Stop the vehicle in a safe place.
2. Unlock the seat by inserting the
mechanical key into the lock inside
the front storage compartment and
turn it clockwise.
3. Open the seat and check that the
trunk light comes on.
4. Push the “ON/
” switch once.
5. Without completely shutting the
seat, raise and lower it three times
within 10 seconds.
TIP
Use the rear storage compartment light
as a guide when raising and lowering
the seat.
The smart key system indicator
light on the speedometer will come
on for three seconds to indicate
the transition to emergency mode.
6. After the smart key system indica-
tor light goes off, use the “SEAT
OPEN/
” switch to enter the
identification number. Refer to the
following procedure on how to in-
put the identification number.
7. Inputting the identification number
is done by counting the number of
flashes of the smart key system in-
dicator light.
For example, if the identification
number is 123456:
Push and hold the “SEAT
OPEN/
” switch.
The smart key system indicator
1. Smart key system indicator light “
”
1. Identification number
1
1
1
2PW-9-E1.book 38 ページ ２０１５年９月１０日 木曜日 午後５時１７分
