background image

THR30II Wireless  THR10II Wireless  THR10II

   Reference Manual

    19

Specifications

Amp Modeling List

Mode

Amp Type

Description

Classic

Clean

A low-gain preamp for sparkling American-style cleans, with 6L6 tubes in the output stage 
for brightness and a strong midrange.

Crunch

EL84 power tubes in a true Class-A configuration with a highly responsive EQ for rich, 
complex harmonic tones and warm overdrive.  Inspired by British chime.

Lead

A low-gain preamp with an EL34-based power section that breaks into classic British over-
drive as the master volume is pushed.

Hi Gain

Powerful modern distortion that fills out as the high-gain preamp is pushed.  Tread carefully 
after 12 o'clock.

Special

12AX7 and 6L6 tubes in pursuit of the "Brown" sound.  Set the gain around 11 o'clock for 
classic rock crunch, or crank it for saturated rhythm tones.

Bass

Woody, vintage tone with late breakup.

Acoustic

Designed for acoustic-electric guitar, modeling the response of a boutique condenser 
microphone.

Flat

A neutral tone with no amp or speaker modeling.  Great for connecting other instruments to 
your THR.

Boutique

Clean

A low-watt EL34 design.  Turning up the preamp gain will thicken up the cleans, then push 
into bluesy overdrive.

Crunch

A deceptively simple amp circuit with just a single 12AX7 and EL84.  A full, no-frills tone 
that is highly responsive to picking dynamics.

Lead

A version of the Classic/Lead circuit, modified for extra gain with a darker tone and 
scooped mids.

Hi Gain

ECC83s into 6L6s for high gain with a highly responsive EQ, inspired by German engineer-
ing.

Special

Four 12AX7 preamp tubes into 6L6 output tubes.   Tight, fast tracking for crushing high-
gain.

Bass

Full, modern tone that breaks into a fuzz-like overdrive when pushed hard.

Acoustic

Designed for acoustic-electric guitar, modeling the response of a boutique tube micro-
phone.

Flat

A neutral tone with no amp or speaker modeling, and a slight bass boost.  Great for con-
necting other instruments to your THR.

Modern

Clean

A boutique, low-watt EL84 design that adds fullness and sustain as the master volume is 
turned up.  A great match for neck pickups.

Crunch

A mid-volume boutique design with 6550 power tubes.  Listen for tight bass response and a 
singing sustain.

Lead

A high-gain design with 12AX7s into EL34s, for the tone that defined 1980s hard rock and 
heavy metal.

Hi Gain

A boosted version of the Classic/Special amp, with even more gain for aggressive rhythms 
or searing leads.

Special

A classic overdrive circuit before the preamp tightens low-frequency response and provides 
even more gain.  Ideal for extended-range guitars.

Bass

Vintage voicing with early breakup for overdrive that works well with bass or guitar.

Acoustic

Designed for acoustic-electric guitar, modeling the response of a boutique dynamic micro-
phone.

Flat

A neutral tone with no amp or speaker modeling, and a slight mid scoop.  Great for con-
necting other instruments to your THR.

Summary of Contents for THR10II Wireless





















Reviews: