Yamaha TG500, Supplementary Manual

Page: 2 / 16

2
2.1.5 Program change
When a program change is received, the TG500 performs the
following operations.
Three reception mode types can be set during the system setup.
1) off : Program change is not received.
2) normal
: In each play mode, the program No. changes in
accordance with 00
〜
63 of the current mode .
The program bank change is not received.
Program change Nos. are assigned as follows in
accordance with the mode.
Data (dec.)
Voice Internal1 0 〜 63 00 〜 63
Internal2 0
〜
63 00
〜
63
Preset1 0 〜 63 00 〜 63
Preset2 0 〜 63 00 〜 63
Preset3 0 〜 63 00 〜 63
Preset4 0
〜
63 00
〜
63
Card1 0 〜 63 00 〜 63
Card2 0 〜 63 00 〜 63
Card3 0
〜
63 00
〜
63
Card4 0 〜 63 00 〜 63
Perfor Internal1 0 〜 63 00 〜 63
-mance Preset1 0
〜
63 00
〜
63
Preset2 0 〜 63 00 〜 63
Card1 0 〜 63 00 〜 63
Card2 0 〜 63 00 〜 63
4) table
: Reception is carried out in accordance with the
PROGRAM CHANGE TABLE.
Bn 00 xx 20 xx Data (dec.)
Internal1 Voice 00,00
Internal2 Voice 00,03
Preset1 Voice 00,02
Preset2 Voice 00,05
Preset3 Voice 00,08
Preset4 Voice 00,11
Card1 Voice 00,01
Card2 Voice 00,04
Card3 Voice 00,07
Card4 Voice 00,10
Internal1 Performance 00,64
Preset1 Performance 00,66
Preset2 Performance 00,69
Card1 Performance 00,65
Card2 Performance 00,68
Internal1 Multi 00,16
Internal1 Voice(multi) 00,32
Internal2 Voice(multi) 00,35
Preset1 Voice (multi) 00,34
Preset2 Voice (multi) 00,37
Preset3 Voice (multi) 00,40
Preset4 Voice (multi) 00,43
Card1 Voice(multi) 00,33
Card2 Voice(multi) 00,36
Card3 Voice(multi) 00,39
Card4 Voice(multi) 00,42
Internal1 Perf(multi) 00,80
Preset1 Perf (multi) 00,82
Preset2 Perf (multi) 00,85
Card1 Perf(multi) 00,81
Card2 Perf(multi) 00,84
3) direct
: In voice mode, voice 00 〜 63 correspond to the
program change data 00 〜 63. INT1, 2, PRE 1-4,
and CARD1-4 change in accordance with the
program bank change.
Program change data 64
〜 127 are not received.
In performance mode, performance 00 〜 63
correspond to the program change data 00
〜
63.
INT1, PRE1, 2, and Card 1, 2 change in
accordance with the program bank change.
Program change data 64
〜 127 are not received.
In Multi mode, each INST program changes in
accordance with the above.
Program bank change Nos. are assigned as
follows in accordance with the mode.
3. System exclusive message
3.1 Parameter change
The TG500 transmits and receives the following eight parameter change
types.
(7) Remote switch is received only.)
7) Remote switch will be the same as the screen when the switch is
pressed.
。
1). Multi Data
2). Performance Data
3). Normal Voice Data
4). Drum Voice Data
5). Setup Data
6). Program Change Table
7). Switch Remote
8). Master Tuning
The parameter change reception cannot be turned off with the MIDI
switches, except for Device Number off.
3.1.1 TG500 Data parameter change
(1) Format
11110000 F0
01000011 43
0001nnnn nnnn = Device Number
00101001 29
0000gggg gggg
= Parameter Group Number
0sssssss sssssss
= Parameter Sub Group Number
0ppppppp ppppppp = Parameter Number MS7bit
0ppppppp ppppppp
= Parameter Number LS7bit
0vvvvvvv vvvvvvv
= Data Value MS7bit
0vvvvvvv vvvvvvv = Data Value LS7bit
11110111 F7
(2) Parameter Group Number,Sub Group Number
2.1.6 Pitch bend
Pitch bend is received only on the MSB side.
2.1.7 After touch
After touch is received in accordance with the reception channel
of each mode.
2.1.8 Channel mode message
cntrl# Parameter data rng
120 All Sound Off 0
121 Reset All Controller 0
123 All Notes Off 0
Parameter Group Name
gggg sssssss
Multi Data 0 0,1..16 *1
Performance Data 1 0,1..4 *2
Normal Voice Data 2 0 *3
Drum Voice Data 3 0,36..84 *4
Setup Data 4 0 *5
Program Change Table 7 0..63 *6
Switch Remote 8 0
(3) Parameter Number,Data Value
See the appended table 1.
*1:1..16;Inst Number,0;common data
*2:1..4;Layer Number,0;common data
*3:0=Voice
*4:36..84=Key Number,0;common data
*5:0=syn
*6:Program Number