background image

Configuration screens

Reference Manual

TF Series

- 72 -

When the Fader Assign button is turned on, you can use this area to change which 
bands can be adjusted by the faders. (TF3 and TF1 only.)

6

Gain slider

Adjusts the gain for the corresponding band.
Swipe left or right to display the gain sliders for other bands.
When the Fader Assign button is turned on, you can use this area to change which 
bands can be adjusted by the faders. (TF3 and TF1 only.)

7

Output level meter

Displays the GEQ output level.

8

Available bands display

Displays the number of additional bands that you can adjust.

GEQ screen menu

Press the Menu key (

) from the GEQ screen to display the following options.

Using GEQ

1.

Touch the GEQ button to turn GEQ on.

2.

Swipe left or right on the gain sliders to display the 
desired bands.

3.

Drag sliders up and down to adjust the gain of the corresponding bands.

You can confirm the overall output using the output level meter.

Once you have adjusted gain for 12 bands, the gain sliders for the remaining bands are displayed in 
gray. If you want adjust gain for other bands, you must first set the gain to 0 for one of the bands you 
have already adjusted.

Touch the gain slider quickly two times to reset it to its default value (0 dB).

Gain slider

Output level meter

Using faders to adjust GEQ (TF5/TF3/TF1)

1.

Touch the Fader Assign button to turn it on.

The current gain setting for each band is applied to the faders 
in the channel strip section of the console.

You can confirm the frequency and gain for each band in the channel display.

2.

For TF3 and TF1, swipe left or right on the gain sliders in the GEQ screen to select 
other bands.

You can swipe the EQ graph, RTA display, or band selection area left or right to select other bands.

For TF5, all bands are applied to the faders.

3.

Use the console's faders to adjust the gain.

If you turn on a channel's [ON] key, you can reset the gain of frequencies assigned to that channel to 
0 dB.

4.

When you are finished making adjustments, touch the Fader Assign button to turn 
it off.

Fader Assign also turns off when you switch another screen or enter SENDS ON FADER mode.

1

Copy

Copies the GEQ parameters of the selected 
channel to the clipboard.

2

Paste

Pastes the GEQ parameters in the clipboard to the 
selected channel.

3

Compare

Allows you to compare the GEQ parameters of the 
selected channel with the GEQ parameters in the 
clipboard by switching between the two.

4

Default

Resets the GEQ settings for the current channel to 
their default values.

ձ

ղ

ճ

մ

Summary of Contents for TF-Rack








































































































Reviews: