Yamaha TENORI-ON TNR-O Page 111 Manual Download

Page: 111 / 123

Appendix

TENORI-ON Manual

111

Display Message List

Appendix

Display Message List

Power Save...

Power Save mode in operation.

Mode different.

Can't Copy!

This message will appear if you attempt to use the CopythisLayer function (

➝

page 56

) to copy

between layers that have different performance modes. Data cannot be copied between layers

that have different mode.

UNDO?

This message will appear after you execute a copy, clear, or reset function from the Edit menu.

Press the [OK] button to undo the copy, clear, or reset function just executed.

Press the [CANCEL] button, or any button other than the [OK] button, or wait for the 15-second

timeout to return to the menu.

Currently loading a file.

Don’t turn off the power or remove the SD Memory Card while this display is showing.

Saving...

Currently saving a file to an SD Memory Card or the internal flash memory.

Don’t turn off the power or remove the SD Memory Card while this display is showing.

Executing...

Currently executing a file rename or delete operation.

Don’t turn off the power or remove the SD Memory Card while this display is showing.

Formatting...

Currently formatting an SD Memory Card.

SD Card Error!

No SD Card.

No SD Memory Card is in the card slot.

Unformatted!

The SD Memory Card in the card slot has not been formatted.

SD Card Error!

Card is Locked.

The SD Memory Card write-protect switch is "ON" (write protected).

SD Card Error!

Access Timeout.

A timeout error has occurred during a SD Memory Card save or load operation.

SD Card Error!

Illegal Media.

The media in the card slot is unsupported.

SD Card Error!

Card is Full.

The SD Memory Card is full and no more data can be written to it.

SD Card Error!

Card is Not Ready.

The SD Memory Card is not ready for a read or write operation.

SD Card Error!

Illegal File Name.

The name specified for ma file load operation is not allowed.

SD Card Error!

Illegal Format.

The format of the card in the card slot is not supported.

SD Card Error!

Not Supported File.

The file format is not supported.

SD Card Error!

The File is Broken.

The file is corrupted.

SD Card Error!

Can not Open File.

The file cannot be opened.

SD Card Error!

Can not Write File.

The file cannot be written.

SD Card Error!

Can not Read File.

The file cannot be read.

SD Card Error!

Unexpected Error.

An unexpected error has occurred.

SD Card Error!

Mode is Different.

The performance mode and TENORI-ON mode are different.

Alarm Playing...

The alarm is currently playing in the Interior Mode.

Time Signal...

The time signal is currently playing in the Interior Mode.

Summary of Contents for TENORI-ON TNR-O




























































































































Search results

Summary of Contents for TENORI-ON TNR-O

Reviews:

Related manuals for TENORI-ON TNR-O

Brands by name

Popular brands

Yamaha TENORI-ON TNR-O, Manual

Search results

Summary of Contents for TENORI-ON TNR-O

Reviews:

Related manuals for TENORI-ON TNR-O

Brands by name

Popular brands