Instrument and control functions
4-26
4
3. Install the bleed screws.
4. Lower the front wheel so that it is
on the ground, and then put the
sidestand down.
EAUM4121
Adjusting the shock absorber
assembly
This shock absorber assembly is
equipped with a spring preload adjust-
er and rebound and compression
damping force adjusters.
NOTICE
ECA10102
To avoid damaging the mechanism,
do not attempt to turn beyond the
maximum or minimum settings.
Spring preload
Turn the adjuster in direction (a) to in-
crease the spring preload.
Turn the adjuster in direction (b) to de-
crease the spring preload.
To set the spring preload, turn the ad-
juster in direction (b) until it stops, and
then count the clicks in direction (a).
TIP
When turning the spring preload
adjuster in direction (b), the 0 click
position and the 1 click position
may be the same.
When turning the spring preload
adjuster in direction (a), it may
click beyond the stated specifica-
1. Bleed screw
1
1. Spring preload adjusting knob
Spring preload setting:
Unit for adjustment:
Cam position
Minimum (soft):
0
Standard:
10
Maximum (hard):
24
1
(b)
(a)
Summary of Contents for Tenere 700
Page 107: ......
