–27–
EB802401
2. Battery
S
Check the condition of the battery.
Refer to “BATTERY INSPECTION”.
Open-circuit voltage
12.8 V or more at 20
_
C
S
Is the battery OK?
YES
NO
S
Clean the battery
terminals.
S
Recharge or replace
the battery.
EB802411
3. Main switch
S
Check the main switch for continuity.
Refer to “SWITCH INSPECTION”.
S
Is the main switch OK?
YES
NO
Repalce the main
switch.
EB806400
4. Wiring
S
Check the entire signal system’s wiring.
Refer to “CIRCUIT DIAGRAM”.
S
Is the signal system’s wiring properly con-
nected and withour defects?
YES
NO
Properly connect or
repair the signal sys-
tem’s wiring
Check the condition
of each of the signal-
ing system’s circuits.
Refer to “SIGNAL
SISTEM CHECK.”
SIGNAL SYSTEM
ELEC
NOTE:
S
Check the main and signaling system fuses
for continuity.
Refer to “FUSE INSPECTION”.
S
Are the main and signaling system fuses OK?
1. Main and signal system fuses
YES
NO
Replace the fuse(-s).
EB806010
TROUBLESHOOTING
S
Any of the following fail to light: flasher
light, trun and fuel level indicator light.
S
The fuel meter fails to operate.
Check:
1. main and signal system fuses
2. battery
3. main switch
4. wiring
(of the entire signal system)
S
Before troubleshooting, remove the following
part(-s):
1) seats
2) fuel tank
3) air filter case
4) side cowlings
5) side covers
S
Troubleshoot with the following special tool(-s).
Pocket tester
90890-03112
EB802400