Yamaha TDM TWIN 900, Owner'S Manual

Page: 31 / 110

INSTRUMENT AND CONTROL FUNCTIONS
3-16
3
Compression damping force
To increase the compression damping
force and thereby harden the compres-
sion damping, turn the adjusting knob
in direction
a
. To decrease the com-
pression damping force and thereby
soften the compression damping, turn
the adjusting knob in direction
b
.
CI-03E
NOTE:
_
Although the total number of clicks of a
damping force adjusting mechanism
may not exactly match the above spec-
ifications due to small differences in
production, the actual number of clicks
always represents the entire adjusting
range. To obtain a precise adjustment,
it would be advisable to check the num-
ber of clicks of each damping force ad-
justing mechanism and to modify the
specifications as necessary.
_
EAU00315
WARNING
@
This shock absorber contains high-
ly pressurized nitrogen gas. For
proper handling, read and under-
stand the following information be-
fore handling the shock absorber.
The manufacturer cannot be held re-
sponsible for property damage or
personal injury that may result from
improper handling.
●
Do not tamper with or attempt to
open the gas cylinder.
●
Do not subject the shock ab-
sorber to an open flame or other
high heat sources, otherwise it
may explode due to excessive
gas pressure.
● Do not deform or damage the
gas cylinder in any way, as this
will result in poor damping per-
formance.
●
Always have a Yamaha dealer
service the shock absorber.
@
1. Compression damping force adjusting knob
Minimum (soft) 12 clicks in direction
b
*
Standard 11 clicks in direction
b
*
Maximum (hard) 1 click in direction
b
*
* With the adjusting knob fully turned in direction
a
U5PSE0.book Page 16 Thursday, December 13, 2001 4:29 PM