4
En
■
Assembling the supplied AM loop
antenna
■
Connecting the wire of the AM loop
antenna
CONNECTIONS
Indoor FM
antenna
(supplied)
AM loop antenna (supplied)
• The AM loop antenna should always be connected, even if
an outdoor AM antenna is connected to this unit.
• The AM loop antenna should be placed away from this
unit.
Outdoor AM antenna
Use a 5 to 10 m of vinyl
covered wire extended
outdoors from a window.
Ground
For maximum safety and minimum interference, connect the
antenna GND terminal to a good earth ground.
A good earth ground is a metal stake driven into moist earth.
RCA stereo
cable
(supplied)
Do not connect power
cable until all cable
connection are complete.
CAUTION
Analog audio
input
If you experience poor reception quality, install an outdoor antenna. Consult the nearest authorized Yamaha dealer or service center
about outdoor antennas.
Note
Amplifier
To the AC wall outlet
y
It is recommended that you use the
Tune Aid function in order to
maximize DAB reception capability
(see page 9).
Indoor DAB antenna (supplied)
Stretch out the antenna and place it to
find the best reception position then fix it.
Digital audio
input
The DIGITAL RADIO OUTPUT jacks (OPTICAL
and COAXIAL) output the digital audio signals
(PCM signals) when this unit is in the DAB tuning
mode. DAB audio signals are also output the
ANALOG OUTPUT jack of this unit. FM or AM
audio signals are not output at the DIGITAL
RADIO OUTPUT jacks.
Note
Optical
cable
Coaxial digital
audio cable
black
white
